Difference between revisions of "Cadence Encounter"

From Vlsiwiki
Jump to: navigation, search
(New page: To use the Cadence tools, you must change this environment variable: * export OSUcells=/mada/software/techfiles/osu_soc_v2.7/cadence The OSU scripts for Cadence can be copied from h...)
 
Line 9: Line 9:
 
You will need to specify the correct top-level name and gate-level netlist name in encounter.conf. To place and route the design, type:
 
You will need to specify the correct top-level name and gate-level netlist name in encounter.conf. To place and route the design, type:
  
* encounter -f encounter.tcl
+
* encounter encounter.tcl
  
 
with X11 exported to your local machine. If this completes successfully, you can hit "f" to center the layout.
 
with X11 exported to your local machine. If this completes successfully, you can hit "f" to center the layout.

Revision as of 15:16, 29 February 2008

To use the Cadence tools, you must change this environment variable:

   * export OSUcells=/mada/software/techfiles/osu_soc_v2.7/cadence 

The OSU scripts for Cadence can be copied from here:

  • cp -rf /mada/software/techfiles/osu_soc_v2.7/cadence/flow/tsmc018

You will need to specify the correct top-level name and gate-level netlist name in encounter.conf. To place and route the design, type:

  • encounter encounter.tcl

with X11 exported to your local machine. If this completes successfully, you can hit "f" to center the layout.