Desktop Setup - Ubuntu 10.04

From Vlsiwiki
Revision as of 21:07, 15 October 2010 by Test (Talk | contribs) (Installing CUDA 3.2 (incomplete))

Jump to: navigation, search

Currently still testing the distribution, so please report any problems to Ian and Jose!!

  • 0 - Install Ubuntu 10.04 x86_64

NOTE: ONLY if you have trouble with Step 4 of the installation process, the partition selection, open a terminal in the trial mode and run:

sudo dmraid -r -E /dev/sda

NOTE: When prompted for a username, choose one that is NOT your SOE login! For example "ian_local" rather than my SOE login of "ianlee1521". Otherwise you will not be able to login to your computer after you setup LDAP.

NOTE: When prompted for a machine name, enter the name that machine is supposed to be (mascd1, omelette, quiche, etc)

Installation should complete as normal.




  • 1 - Enable root account

Login to the GUI with your local login, then open a terminal (Applications -> Accessories -> Terminal):

sudo su - 
passwd

Enter your new root password for the machine.

Add your local and SOE logins to the sudoers list:

vim /etc/sudoers
  • 2 - Install NVIDIA Drivers

Blacklist some kernel modules

vim /etc/modprobe.d/blacklist.conf

Add the following lines to the file

blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv

Get rid of any installed NVIDIA drivers:

sudo apt-get --purge remove nvidia-* 

Reboot the machine. X11 will not start. Switch to a terminal (CTRL + ALT + F1), and login as root:

wget http://us.download.nvidia.com/XFree86/Linux-x86_64/256.53/NVIDIA-Linux-x86_64-256.53.run
chmod 744 NVIDIA-Linux-x86_64-256.53.run
service gdm stop
./NVIDIA-Linux-x86_64-256.53.run

Reboot the machine and X should start normally. Login at the GUI login as root and open a terminal.

  • 3 - Setup the new repo
apt-get install -y emdebian-archive-keyring
echo -e "\ndeb http://www.emdebian.org/debian/ lenny main" | tee -a /etc/apt/sources.list
apt-get update -y
apt-get dist-upgrade -y
  • 4 - Setup the cross package
apt-get install -y apt-cross dpkg-cross libncurses5-dev
  • 5 - Instal ARM packages
apt-get install -y libc6-armel-cross libc6-dev-armel-cross
apt-get install -y binutils-arm-linux-gnueabi gcc-4.3-arm-linux-gnueabi g++-4.3-arm-linux-gnueabi 
apt-get install -y linux-libc-dev-armel-cross
apt-get install -y uboot-mkimage
  • 6 - Install SPARC packages
apt-get install -y libc6-sparc-cross libc6-dev-sparc-cross
apt-get install -y binutils-sparc-linux-gnu gcc-4.3-sparc-linux-gnu g++-4.3-sparc-linux-gnu
apt-get install -y linux-libc-dev-sparc-cross
  • 7 - Adjust sysctl options

mmap problem for qemu

vim /etc/sysctl.d/10-zeropage.conf

Edit the following value:

vm.mmap_min_addr = 4096

increase (add) the inotify watches in /etc/sysctl.conf

echo -e "\nfs.inotify.max_user_watches = 65535" | tee -a /etc/sysctl.conf
  • 8 - Replicate the installation on Master machine (mascd12, dhcp-63-154.cse.ucsc.edu)
ssh <username>@mascd12 dpkg --get-selections > mypackages.txt
dpkg --set-selections < mypackages.txt

"apt-get dselect-upgrade -y" Will give many options and take a long time for the upgrade (about an hour for me).

Select all default options EXCEPT! for ion3: acknowledge the lack of support (non-default option)

apt-get dselect-upgrade -y
  • 9 - Install autofs

Create mada directory

mkdir /mada

Get autofs files from another machine

scp <username>@mascd12:/etc/auto.* /etc/
ln -s /mada/users /soe
initctl reload autofs
  • 10 - awk for cadence
apt-get install -y ksh csh original-awk
ln -s /usr/bin/awk /bin/awk
  • 11 - Set the firewall
ufw enable
ufw default deny
ufw reject auth
ufw limit ssh/tcp
  • 12 - Get tempcap from another ubuntu machine (mascd1, mascd12, ...)
scp <username>@mascd12:/usr/lib64/libtermcap.so.2.0.8 /usr/lib64/
ln -s /usr/lib64/libtermcap.so.2.0.8 /usr/lib64/libtermcap.so.2
  • 13 - LDAP

Install

apt-get install -y ldap-auth-client libpam-krb5 krb5-user libsasl2-modules-gssapi-mit

Leave the kerberos config entry blank. You will copy it in the next step.

Create /ect/krb5.conf

scp <username>@mascd12:/etc/krb5.conf /etc/

Copy the ldap certificate

scp <username>@mascd12:/etc/ssl/certs/* /etc/ssl/certs/

Create "/etc/auth-client-config/profile.d/krb-ldap-config"

scp <username>@mascd12:/etc/auth-client-config/profile.d/krb-ldap-config /etc/auth-client-config/profile.d/krb-ldap-config
auth-client-config -a -p krb_ldap

Update ldap.conf

scp <username>@mascd12:/etc/ldap.conf /etc/ldap.conf
scp <username>@mascd12:/etc/ldap/ldap.conf /etc/ldap/ldap.conf

Now you should be able to execute:

ldapsearch -x LLL
  • 14 - Lock SOE people out of your machine :)
scp <username>@mascd12:/etc/security/access.conf /etc/security/access.conf

You will need to add your local login to the machine, or you will lock yourself out:

vim /etc/security/access.conf

Go to very bottom of file and add your local user account to the list below root Example of the last lines of my file (Replace "ian_local" with your local login):

+ : root : ALL
+ : ian_local : ALL
+ : (masc) : ALL
+ : (vlsi) : ALL
-:ALL :ALL 

Now, you should see people with "getent passwd" but, calling "su - cormac" should say "permission denied", but, calling "su - renau" should work.

  • 15 - Restart your computer:
shutdown -r now
  • 16 - Login to the GUI with your SOE login information. If you get a prompt asking for an "LDAP Password" this means that you typed your password incorrectly.
  • 17 - Re-Install NVIDIA Drivers ONLY IF NEEDED (If you get a graphical error when you restarted)!

Switch to tty1 (CTRL + ALT + F1), and login as root.

service gdm stop
./NVIDIA-Linux-x86_64-256.53.run

Restart for the changes to take effect properly:

shutdown -r now
  • 18 - Remove old desktop configuration files (KDE / GNOME / browser)

NOTE: Removing ".config" will delete any saved passwords in your browser, but will fix other problems.

Logout of / kill any open X sessions. Switch to tty1 (CTRL + ALT + F1), and login with your SOE account.

rm -rf .config .kde* .gconf* .gnome*
  • 19 - Some Minor Patches for things that don't work properly

Disable apparmor

sudo invoke-rc.d apparmor stop
sudo update-rc.d -f apparmor remove
  • 20 - Using QEMU and ARM in 32 bit mode. We need to install 32 bit libraries for this (as root).
apt-get install g++-multilib lib32z1 lib32z1-dev lib32ncurses5 lib32ncurses5-dev
  • 21 - Miscellanous Kate and Kwrite text editors
apt-get install kate kwrite


Installing CUDA 3.2

You will need sudo access to install CUDA 3.2. It can only be installed on machines with NVIDIA GPUS.

Move these files to your home directory.


  • Make sure the following kernel modules are blacklisted
sudo vim /etc/modprobe.d/blacklist.conf

If not already present, add the following lines to the file

blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv


  • Get rid of any installed NVIDIA drivers:
sudo apt-get --purge remove nvidia-* 


  • Reboot the machine. X11 will not start. Switch to a terminal (CTRL + ALT + F1), and login.


  • Stop X11
sudo service gdm stop


  • Install the downloaded device driver first.
sudo devdriver_3.2_linux_64_260.24.run
  • Accept the license agreement.
  • Install NVIDIA's 32-bit compatibility OpenGL libraries? Answer: YES
  • Would you like to run the nvidia-xconfig utility to automatically update your X configuration file so that the NVIDIA X driver will be used when you restart X? Answer: YES


  • Install the CUDA toolkit (nvcc etc. )
sudo cudatoolkit_3.2.9_linux_64_ubuntu10.04.run 

Choose default options. CUDA will be installed in the /usr/local/cuda directory. When the installation is complete, you will be asked to make changes to your INCLUDE and LD_LIBRARY_PATH env. variables.


  • Reboot and login.