Technology Setup

From Vlsiwiki
Revision as of 20:51, 1 October 2007 by Mrg (Talk | contribs)

Jump to: navigation, search

Connecting Remotely

First of all, the tools are only set up on mosis4.cse.ucsc.edu (for CMPE 222) or on any of the mada machines (for Jose and my research groups). You must run them remotely on the machines by exporting your X display:

ssh -Y mosis4.cse.ucsc.edu

and you must have an X11 client on your computer. You can do this from home if you have a fast machine. Otherwise, you must use the graduate computing labs.

Setting up the CAD Tools

On this machine, all of the CAD tools are set up by a single setup file called /mada/software/setup.sh. It is written for bash, so you will need to run this shell first if you do not already. You can check your shell by typing:

echo $SHELL

If your default shell is cshrc (the SOE default), you can either a) request that the SOE change it via itrequest or b) run bash at the end of your .cshrc file.

In your .bashrc file add the following lines:

source /mada/software/setup.sh

For those who use csh or tcsh, you can get setup.csh here. http://www.soe.ucsc.edu/~michael/setup.csh

You must now log out and log back in to get the new setup.